Hummer H1 Mod Mafia Inspection Hub Covers

Hummer H1 Mod Mafia Inspection Hub Covers

Inspection Site Glass

These Hub covers have a site glass installed so the level and condition of the fluid can be seen and monitored without removing the wheel or opening the fill plug. This is a large advantage over stock hub covers because if you get water in your hub you will be able to see the hub oil turn murky. Being able to see the level is important for generally maintenance, but it’s extremely helpful on long road trips. It can add piece of mind if you discover a hub oil leak because then you will know if you need to tow your vehicle home or just drive it and fill when you get home.

Why Ribbed

We wanted to produce a ribbed hub cover to increase cooling. Although hubs are one of the most reliable pieces on the truck, that does not mean it could not be better. Our results over the course of months of testing has shown a reduction in the heat generated from driving by 36%. Example: we saw temperatures of 2wd Hummers get to 160F when ambient was 80F. With these covers it dropped the temp by 28.8F to 131.2F. This reduction in hub temperature will increase seal and oil life.

Construction

These plates are machined from 6061 T6 aluminum

All new 304 SS hardware is included

MM machined fill plug

Inspection Site Glass is rated for 500F and 1000psi

Anodized or unfinished

Extra machining on hub covers to clear steering arms (where needed)

Sold in sets of (4) enough for entire truck.